Proč můj filtr Swim Spa nečerpá vodu?

Pravidelně kontrolujte hladinu vody ve Swim Spa, abyste se ujistili, že je ve správné výšce. Pokud je hladina vody příliš nízká, okamžitě přidejte vodu, aby bylo zajištěno, že čerpadlo má dostatek vody pro normální provoz.Udržujte filtrační koš čerpadlaUživatelé by měli v pravidelných intervalech čistit filtrační koš čerpadla, aby velké nečistoty neblokovaly přívod vody do čerpadla. Po vyjmutí filtračního koše vyčistěte nečistoty a opláchněte jej čistou vodou.

Jak zabránit tomu, aby filtr nevytekal?

Aby se předešlo problému, že se filtr Swim Spa nevypouští, musí si uživatelé vytvořit plán pravidelné údržby. Zde je několik tipů, jak problémům předejít:

● Pravidelně čistěte filtr: Filtr čistěte každé dva týdny a pravidelně kontrolujte stav filtru, abyste se ujistili, že správně funguje. Filtr pravidelně vyměňujte podle doporučení výrobce zařízení.

● Udržujte správnou hladinu vody: Kontrolujte často hladinu vody ve Swim Spa, abyste se ujistili, že čerpadlo je vždy zásobováno dostatečným množstvím vody.

● Pravidelně kontrolujte čerpadlo a potrubí: Jednou za čas zkontrolujte provozní stav čerpadla, abyste se ujistili, že potrubí není ucpané nebo netěsné.

● Udržujte filtrační koš čerpadla: Udržujte filtrační koš čerpadla v čistotě, abyste zabránili ucpání čerpadla nečistotami.

Zažijte dokonalou kombinaci dostupného luxusu a inovativního designu s Lovia Spa, přední značkou v oblasti venkovního wellness. Naše certifikované akrylové vířivky a plavecké vířivky uspokojují potřeby hotelů, lázní a soukromých kupujících po celém světě. S více než 20 odborníky a výrobní kapacitou 1 200 jednotek měsíčně dodáváme včas a v rámci rozpočtu. Kontaktujte nás ještě dnes pro přizpůsobená řešení a prozkoumejte naše slevy na hromadné nákupy pro maximální úspory.

Pump Problems

A faulty or malfunctioning pump is one of the main reasons why the swim spa filter does not flow. The pump is the power source that drives the water flow. If the pump does not work or is inefficient, water will naturally not be able to pass through the filter.

● The pump is not powered or the power is insufficient: The pump requires electricity to drive the pump. If the pump is not powered correctly or the power supply is insufficient, the pump will not work properly, resulting in water flow interruption. Checking the power connection is the first step in troubleshooting this problem.

● Damaged or aged pump: If the internal parts of the pump are aged or damaged, such as worn pump blades or stuck bearings, the pump's water absorption capacity decreases and water cannot flow smoothly through the filtration system. In this case, the pump may need to be replaced or repaired.

Filter blockage

The main function of the filter is to intercept impurities in the water, but over time, more and more dirt, debris, grease, etc. will accumulate on the filter element. If the user does not clean or replace the filter regularly, the filter element may be completely blocked, causing water to be unable to pass through the filtration system.

● Filter blockage: The filter element is the core component of the filter and is responsible for intercepting tiny particles in the water. If the filter element is too dirty, the water flow resistance increases and even completely blocks the water flow. Users should clean the filter element regularly or replace it with a new one regularly according to the recommendations in the equipment manual.

● Filter housing blockage: Not only will the filter element be blocked, but the inlet and outlet of the filter housing may also accumulate dirt due to long-term use. In this case, even if the pump is operating normally, the water cannot flow smoothly through the filter, resulting in no water.

Air entering the system

The water circulation system of the Swim Spa is a closed system, and any leak in it will cause air to enter. If air is mixed into the system, the pump may experience "air lock" and prevent water from flowing through the filter properly.

● Leaking pipes or joints: Poor sealing of pipes or joints may allow air to enter the water circulation system. When the pump cannot build up enough water pressure, the water flow is weakened or even stopped. In this case, it is particularly important to check the tightness of all pipes and joints and eliminate leaks.

● Pump running dry: If the pump runs for a long time without water (i.e. "running dry"), air will enter the system and the pump will not be able to suck in water and push the water flow. This will not only cause the filter to not flow water, but may also cause damage to the pump.

Low water level

The water level in the Swim Spa directly affects the water suction capacity of the pump. If the water level is too low, the pump will not be able to suck in enough water to push the water flow through the filter.

● Water level below the water inlet: If the water level in the Swim Spa is lower than the water inlet, the pump will not be able to suck in water, causing the filtration system to not work properly. Checking whether the water level in the Swim Spa is high enough is a basic step to troubleshoot the problem of no water.

Improper filter installation

The way the filter is installed may also affect the smoothness of water flow. If the filter is not installed correctly, the water flow may be blocked or dispersed, resulting in the inability to pass through the filtration system.

● Improper filter installation: If the filter element is not properly aligned with the internal structure of the filter, the water flow will be hindered. Recheck the installation position of the filter element to ensure that it is properly embedded in the filter.

● Damaged or deformed filter housing: The housing of the filter may be deformed due to physical damage, affecting the normal passage of water. If there is a problem with the housing, the entire filter device may need to be replaced.

Clogged pump filter basket

The filter basket in front of the water pump is also a device to intercept large impurities. If the pump filter basket is clogged, the water suction capacity of the water pump decreases, and the water flow is reduced or even stopped completely.

● Clean the pump filter basket: Users can open the pump filter basket regularly for cleaning to ensure that the pump's water intake is not blocked by large particles of impurities such as leaves, mud and sand.

How to solve the problem of Swim Spa filter not watering?

After understanding the possible reasons, we can take some effective measures to solve the problem of filter not watering.

Check the water pump

First, confirm whether the water pump is working properly. Check if the pump is powered and the power connection is secure. If the pump does not run, check if the power cord is damaged and if the plug is plugged in. If there is damage inside the pump, such as worn pump blades or stuck bearings, it is recommended to contact a professional maintenance personnel for repair or replacement.

Clean or replace the filter

If the filter is clogged, the user can clean or replace the filter element by following the steps below:

1. Turn off the power: Before performing any maintenance work, always disconnect the power supply to the Swim Spa to avoid accidents.

2. Remove the filter: Remove the filter and filter element according to the steps in the equipment manual.

3. Clean the filter element: Use high-pressure water to rinse the surface of the filter element to remove accumulated dirt. If the filter element is too dirty, you can use a special cleaning agent to soak and clean it.

4. Check the status of the filter element: If the surface of the filter element is damaged or aged, replace it with a new one in time.

5. Reinstall the filter: Make sure the filter element is correctly aligned with the internal structure of the filter, and restart the device after installation.

Remove Air

If you suspect there is air in the system, you can take the following steps to vent it:

1. Check all joints and pipes to make sure there are no leaks. If you find a leak, retighten the joints or replace the seals.

2. Vent with the Air Valve: Many Swim Spas are equipped with an air vent. Users can open the air vent to vent the air out of the system until the water flows normally.

3. Refill: If the pump is taking in air due to dry running, you can shut down the unit, fill the Swim Spa with water, and restart it.

Check the Water Level

Check the water level in the Swim Spa regularly to make sure it is at the proper height. If the water level is too low, immediately add water to ensure that the pump has enough water to operate normally.

Maintain the Pump Filter Basket

Users should clean the pump filter basket at regular intervals to prevent large debris from blocking the water intake of the pump. After removing the filter basket, clean out the debris and rinse it with clean water.

How to prevent the filter from not draining?

To avoid the problem of the Swim Spa filter not draining, users need to establish a regular maintenance plan. Here are some tips to help prevent problems:

● Clean the filter regularly: Clean the filter every two weeks and check the condition of the filter regularly to ensure it is working properly. Replace the filter regularly according to the equipment manufacturer's recommendations.

● Maintain proper water level: Check the water level in your Swim Spa frequently to ensure that the pump is always supplied with enough water.

● Check the pump and pipes regularly: Check the operating condition of the pump every once in a while to ensure that the pipes are not blocked or leaking.

● Maintain the pump filter basket: Keep the pump filter basket clean to prevent impurities from clogging the pump.

Experience the perfect combination of affordable luxury and innovative design with Lovia Spa, a leading brand in outdoor wellness. Our certified acrylic spas and swim spas cater to the needs of hotels, spas, and private buyers worldwide. With 20+ experts and a production capacity of 1,200 units per month, we deliver on time and within budget. Contact us today for customized solutions and explore our bulk purchasing discounts for maximum savings.